Products
- Got a question?
- Ask a product specialist...
- +44 (0) 1708 372 223
Overview
Specification
Documentation
Overview
S/CPH/LED Central Battery LED System
The S/CPH/LED is designed as a central battery driver with hold off (240V, 110V or 50V AC/DC) with a dedicated emergency LED. At the point the un-switched supply is broken, the driver will accept the feed from the central battery and power one of a choice of ceiling recessed emergency LEDs at 700mA.
This unit is for intermittent use. If being used as a centrally supplied fitting, this must be considered. The unit is not for permanent use.
For details of Liteplan’s dedicated emergency LED devices, please click here.
Ordering Codes
| Code | Description | ||
|---|---|---|---|
| S/CBH/LED/43/FL/** | 115° 237lm Emergency LED to run from a 50V, 110V or a 240V AC or DC central battery system | ||
| S/CBH/LED/43/OA/** | 135° 268lm Emergency LED to run from a 50V, 110V or 240V AC or DC central battery system | ||
| S/CBH/LED/43/CO/** | 155° x 115° 266lm Emergency LED to run from a 50V, 110V or 240V AC or DC central battery system |
Specification
S/CPH/LED Central Battery LED System
Specifications
- Suitable for 50V, 110V & 240V Central Battery Systems
- Operates a Dedicated Ceiling Recessed LED
- Suitable to be Placed in the Ceiling Void
- Module Provided with Adequate Strain Relief
To determine the power drawn from the central battery system in each scenario, please use the below chart in your calculations:
|
Supply Voltage |
Output Current (mA) |
Output load |
Supply Current (mA rms) |
Supply Power (W) |
Supply power factor |
Supply VA |
|
240V AC |
700 |
1 x LED |
36 |
3.60 |
0.41 |
8.8 |
|
240V DC |
14 |
3.36 |
– |
– |
||
|
110V AC |
54 |
3.50 |
0.58 |
6.1 |
||
|
110V DC |
30 |
3.30 |
– |
– |
||
|
50V AC |
135 |
4.40 |
0.65 |
6.9 |
||
|
50V DC |
78 |
3.90 |
– |
– |
Documentation
