Products
- Got a question?
- Ask a product specialist...
- +44 (0) 1708 372 223
Overview
Specification
Documentation
Overview
CT6S/MYMESH Twinspot Emergency Luminaire
The CT6S is a simple to install 3 hour Non-Maintained LED Emergency Twin Spot unit with an ingress protection rating of IP65. The product is supplied ready to connect to a MyMesh wireless control system.
This product operates with the latest LiFePO4 batteries that not only last far longer than traditional emergency lighting batteries, but consume far less power.
Ordering Codes
| CT6S/6/LP/NM3/MYMESH | Non-Maintained Standard Operation High Output |
|---|
Specification
CT6S/MYMESH Twinspot Emergency Luminaire
Specifications
- Ready for Connection to MyMesh
- 610 lumen Output
- Tested by The LIA. Reports and ldt files available
- Extra Long Life LiFePO4 Batteries
- Simple Installation
- Deep Discharge Protection
- High Efficiency
- Low Maintenance
- Lightweight Construction
- Ingress Rating – IP65
- LiFePO4 Battery Protection with Automatic Cut-off
| Mains Supply | 230-240V AC 50/60 Hz |
|---|---|
| Power Rating Charged * | 1.2W 13mA λ = 0.43 |
| Power Rating – Charging * | 4.0W 21mA λ = 0.79 |
| Electrical Classification | Class 1 |
| Ambient Temperature | 0°C to +35°C |
| Duration | 3-Hours |
| Recharge Period | 24-Hours |
| Battery Type | LiFePO4 Cells |
| Battery Pack | 6.4V 4.8Ah |
| Charge Current | 225mA Nominal |
| Battery Discharge Current | 1.1A |
| Enclosure (L x W x H) | 300mm x 280mm x 95mm |
* Following its initial charge, the emergency control gear will spend 90% of its operational life in standby mode.
Documentation
