Products
- Got a question?
- Ask a product specialist...
- +44 (0) 1708 372 223
Overview
Specification
Documentation
Overview
EMTrac/MYMESH – Track Mounted Emergency LED
Liteplan’s EMTrac/MYMESH is a 3-hour Non-Maintained Emergency LED which is designed as a discrete and simple emergency lighting solution to track fed lighting schemes. In keeping with the emergency lighting standards, the product is locked in place on the track to inhibit post installation relocation. This retains the agreed emergency lighting scheme in the event of the mains lighting being adjusted. This product is supplied ready to connect to a MyMesh wireless control system. Available in white (RAL9016) and black (RAL9005).
The product is suitable for Global Trac, Eutrac and Stucchi track systems. We supply the track adaptor, however this is only suitable for Global, Eutrac and Stucchi 3-circuit track systems. For other track systems, we will require the track adaptor to be free issued to us.
The EMTrac range is suitable for use with LiteMesh wireless emergency lighting monitoring system.
Ordering Codes
| EMTrac/1/NM/W | Non-maintained basic operation in a white finish | ||
|---|---|---|---|
| EMTrac/1/NM/B | Non-maintained basic operation in a black finish | ||
| EMTrac/1/NM/DA/W | Non-maintained DALI 2 self-test operation in a white finish | ||
| EMTrac/1/NM/DA/B | Non-maintained DALI 2 self-test operation in a black finish | ||
| EMTrac/1/NM/LMEM/W | Non-maintained LiteMesh Ready Wireless self-test operation in a white finish | ||
| EMTrac/1/NM/LMEM/B | Non-maintained LiteMesh Ready Wireless self-test operation in a black finish |
* Universal Track adaptor only compatible with Eutrac and Global 3-circuit (Basic or LiteMesh) track systems. Stucchi adaptor should be specified if required.
Specification
EMTrac/MYMESH – Track Mounted Emergency LED
Specifications
- 254 Lumen Output
- Ready to Connect to a MyMesh Wireless System
- Available in White (RAL9016) or Black (RAL9005)
- Ldt files available upon request
- Extra long life LiFePO4 Batteries
- Locks in place to the track
- Low maintenance
- Compatible with Global Trac Systems
- Compatible with Eutrac Systems
- Compatible with Stucchi Systems
- LiFePO4 Battery Protection with Automatic Cut-off
Technical Details:
| Mains Supply | 230-240V AC 50/60 Hz |
|---|---|
| Power Rating Standard | 29mA λ = 0.44 |
| Power Rating Charged * | 0.26W 8mA λ = 0.14 |
| Power Rating Charging * | 5W 28mA λ = 0.74 |
| Ambient Temperature | 0°C to +35°C |
| Duration | 3-Hours |
| Recharge Period | 24-Hours |
| Battery Pack | 3.2V 3.8Ah LiFePO4 |
| Charge Current Standard | 225mA Nominal |
| Battery Discharge Current | 900mA |
* Following its initial charge, this product will spend 90% of its operational life in standby mode.
Documentation
